EasyManua.ls Logo

Avaya S8700 - Main Distribution Frame Labels

Avaya S8700
298 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Main distribution frame labels
Figure 46, Label graphic symbols and nomenclature, on page 142 shows the graphic symbols used on
labels for the media gateways, cross-connections, information outlets, and cables. The labels are color-
coded to identify media gateway wiring:
Green To central office (CO)
Purple To media gateway ports
Yellow To auxiliary equipment and miscellaneous media gateway leads
Blue To information outlets
White From MDF to satellite locations (3-pair)
Each label identifies two rows on the terminal block. The upper half identifies the row above it and the
lower half identifies the row below it. The labels are inserted into the clear plastic designation strips
furnished with the terminal blocks. The strip is snapped in place between the terminal block rows. Label
code number 1220A (comcode 103970000) contains all of the required labels.
Figure 46: Label graphic symbols and nomenclature
Figure notes
1 Floor or Building Identification (write as
required
2 Media Gateway
3 Carrier (leave blank for G600 Media
Gateway)
4 Slot
5 Information Outlet
6 Site/Satellite Closet
7 Tie Circuit
8 Floor
9 Building
r758422i LJK 050996

Table of Contents

Other manuals for Avaya S8700

Related product manuals