Avaya S8700 - Enabling Control of Ipsis

Connecting to the IP server interfaces
188 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
S8700 MC:
S8700 IP
2 Set the Enable Operation of IPSI Duplication? field to y.
3 Press Enter to effect the changes.
Enabling control of IPSIs
NOTE:
Make sure the IPSIs have the same, current firmware.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
1 Type change system-parameters ipserver-interface and press Enter.
change system-parameters duplication Page 1 of 1
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of PNC Duplication? y
Enable Operation of IPSI Duplication? y
change system-parameters duplication Page 1 of 1
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of IPSI Duplication? n
change system-parameters ipserver-interface Page 1 of 1
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22. 0. 0
Secondary Control Subnet Address: . . .
OPTIONS
Switch Identifier: A
IPSI Control of Port Networks: enabled