Avaya S8700 - Installing the Translation File; Setting Alarm Activation Level; Setting IPSI Duplication (High;Critical Reliability Only); Saving Translations

Customizing the media server
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway 57
December 2003
Setting IPSI duplication (high/critical
reliability only)
1
Type change system-parameters duplication and press Enter
2 Set the Enable Operation of IPSI Duplication? field to y.
3 Press Enter to effect the changes.
Setting alarm activation level
1 Type change system-parameters maintenance and press Enter.
2 In the CPE Alarm Activation Level field, select none (default), warning, minor, or major,
depending on the level the customer wants and press
Enter to effect the changes.
3 Repeat for each IPSI.
Installing the translation file
1 Type reset system 4 and press Enter to copy the translation files to the hard drive.
2 Type save translations and press Enter to save the translations to the hard drive.
Saving translations
• Type save translations and press Enter to save the IPSI translations to the hard drive.
change system-parameters duplication Page 1 of 1
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of PNC Duplication? y
Enable Operation of IPSI Duplication? y
change system-parameters maintenance Page 1 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
CPE Alarm Activation Level: none
SCHEDULED MAINTENANCE
Start Time: 22 : 00
Stop Time: 06 : 00
Save Translation: daily
Update LSPs When Saving Translations: y
Command Time-out (hours): 2
Control Channel Interchange: no
System Clocks/IPSI Interchange: no