Testing the complete configuration
280 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Terminal alarm notification
Terminal Alarm Notification is an optional feature that displays several types of alarms on telephones
with administered feature buttons or the attendant console. A maximum of 10 digital and/or hybrid
telephones may be used.
When an alarm occurs, the green status LED associated with the assigned button is in a steady state. The
LED may be turned off by pressing the button associated with the LED. If the LED is off and the alarm
has not been resolved by the time maintenance reschedules testing, the green status LED resumes its
steady state.
IP server interface LEDs
The TN2312BP Internet Protocol Server Interface (IPSI) circuit pack LEDs are shown in Figure 113,
TN2312BP circuit pack faceplate, on page 281). It also has a programmable LED display to indicate
whether its IP address is dynamic (shows media gateway location) or static (shows I P). See Figure 114,
LED display on the IPSI circuit pack—static address, on page 282.
To Next Page
Loading...
