Customizing the media server
54 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Resetting media server
NOTE:
Do not reset the media server if no translations were input or if they were not entered in
bulk.
• Type reset system 4 and press Enter to have the call processing software read the copied
translations.
Adding media gateways
NOTE:
Do this procedure only if the translations were not input earlier.
NOTE:
A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and TDM-
connected.
1 Type add cabinet number (1 through 64) and press Enter for each G650 Media Gateways stack
controlled by one TN2312BP IPSI circuit pack.
2 Fill in the location and carrier type for media gateways 2, 3, 4, and 5.
Administering the IP server interface
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
add cabinet 1 Page 1 of 1
CABINET
CABINET DESCRIPTION
Cabinet: 9
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Rack: Room: Floor: Building:
CARRIER DESCRIPTION
Carrier Carrier Type Number
E not-used PN 09
D not-used PN 09
C not-used PN 09
B G650-port PN 09
A G650-port PN 09
To Next Page
Loading...
