Completing the installation administration
254 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
4 Type almenable and press Enter.
Verify that the SNMP alarm origination is enabled. If used, verify that alarm origination via
modem is still enabled.
5 Log off.
Enabling alarms to INADS on second server
1 Connect to the second media server
2 Repeat Telneting to media server on page 253 through Enabling alarms to INADS via SNMP on
page 253 on the second server.
Registering the system
Follow the existing process and procedures to register the Avaya S8700 Media Server.
Let customers know what the default LAN security settings are; they may want to change them after
installation. Make sure they are aware that if the following items are not set, they will not have remote
access to the media server:
• telnet—no Telnet access
• https—no Maintenance Web Interface access
• def-sat—no SAT command access
To Next Page
Loading...
