60 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Checking and inspecting the order
Perform these tasks before you begin the installation:
• Checking the customer’s order on page 60
• Unpacking and inspecting the media gateways—G650 on page 60
• Checking circuit packs on page 61
• Unpacking and inspecting the media gateways—MCC1 on page 62
• Correcting shipping errors on page 62
Checking the customer’s order
1
Check the customer’s order and the shipping packing lists to confirm that all equipment is
included.
2 Check the system adjuncts for damage and report all damage according to local shipping
instructions.
3 If any equipment is missing, report the information to your Avaya representative.
Unpacking and inspecting the media
gateways—G650
!
DANGER:
Use lifting precautions. An empty G650 Media Gateway weighs 35-39 pounds (16-18
kilograms). Use caution to avoid injury.
1 Unpack the media gateway and remove all packing material.
2 Verify the equipment received. See Figure 1, Equipment packed with a single G650 Media
Gateway, on page 61. Actual equipment may vary in appearance and may ship in separate
packages.
NOTE:
The optional G650 Media Gateways for port hardware only are shipped with AC or DC
power cord or international power cord kit, mounting screw kits, TDM/LAN bus cable,
and EMI Gaskets.
To Next Page
Loading...
