Installing and wiring telephones and trunks
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway 227
December 2003
Figure 91: 3-pair and 4-pair modularity
Installing the queue warning indicator
The connections for the queue warning indicator are the same as external ringing. An AC indicator
(lamp) such as a 21C49 can be used in a uniform call distribution/direct departmental calling
(UCD/DDC) queue.
The lamp is connected to an information outlet. The media gateway side of the MDF is connected to an
analog line circuit pack located in a port carrier.
• Wire the queue warning indicator to the information outlet as shown in Figure 91, 3-pair and 4-
pair modularity, on page 227 and Figure 83, Example adjunct power connections, on page 207.
Figure notes
1 Port Circuit Pack
2 Media Gateway Connector Pins
(3-Pair Modularity)
3 Main Distribution Frame (MDF)
Pins (3-Pair Modularity)
4 Input to Information Outlet
(4-Pair Modularity)
5 Adjunct Power
6 Output From Information Outlet
(4-Pair Modularity)
7 Voice or Data Terminal Pins
To Next Page
Loading...
