Avaya S8700 - Correcting Shipping Errors; Unpacking and Inspecting the Media Gateways-MCC1

62 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Unpacking and inspecting the media
gateways—MCC1
!
DANGER:
Use lifting precautions. A fully loaded MCC1 Media Gateway weighs as much as 800
pounds (363 kilograms) and may be top heavy. Use caution to avoid injury.
1 Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the container. If the
container has been shaken or tilted beyond specifications, the indicators are red, indicating
potential damage. Report any damage according to local shipping instructions.
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2 Unpack the media gateway and remove all packing material.
3 Move the media gateway into its proper position.
4 Do not adjust the leveling feet at this time.
Correcting shipping errors
1 Red-tag all defective and over-shipped equipment and return according to the nearest Material
Stocking Location (MSL) instructions.
To contact the Avaya Order Management group in the United States, call 1-800-772-5409. For
international customers, contact your order service agent.
2 Direct all short-shipped reports to the nearest MSL. Contact the appropriate location for specific
instructions.
For streamlined implementation, call 1-800-772-5409.