Avaya S8700 - Labeling Expansion Control Carrier Cable (MCC1 Media Gateway Only)

176 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Figure 69: Example 4-pair labeling to information outlet
Labeling expansion control carrier cable
(MCC1 Media Gateway only)
1 Place the appropriate AUX connector label on the assigned 110-type terminal block row.
2 On the expansion control carrier cable, place a yellow auxiliary label on the connectors at each
end of the cable.
3 Write “AUX” on each label.
Figure notes
1 Equipment Room
2 To Central Location for Terminals 1
through 6
3 Blue Row on 110 Terminal Block
4 Purple Row on 110 Terminal Block
5 To Port Connector on Media Gateway
(Media Gateway 1, Position B, Slot 03)
6 258A Adapter
7 D-Inside Wire Cut Down to
Connecting Block
8 Information Outlet
9 Telephone
crdf4pr CJL 102996