Testing the complete configuration
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway 283
December 2003
Figure 115: LED display indicating connectivity status
Circuit pack LEDs
Typically, each circuit pack has three LEDs on the front panel. The Table 33, Circuit pack LEDs, on page
283 table describes the red, green, and yellow LEDs and their meaning. Also see Figure 116, Circuit pack
LEDs on faceplate, on page 284.
Figure notes
Connectivity status 1 2 3 4 5
IPSI is connected to media server no yes yes yes yes
IPSI has an IP address no no yes yes no
Laptop computer is connected to IPSI
services port
no no no yes yes
Table 33: Circuit pack LEDs
LED
color
Status Description
Red Alarm The media server has detected a fault in this circuit pack. The alarm log
should contain an on-board alarm. The red LED also is lit briefly when a
circuit pack is inserted or reset. If the circuit pack passes its initialization
tests, the LED goes out.
Green Testing The media server is currently running tests on this circuit pack as part of
background maintenance or demand testing. This LED also is lit during
initialization tests when a circuit pack is inserted or reset.
Yellow Busy The circuit pack currently is in use.
ledlipsi KLC 030502
1 2 43 5
To Next Page
Loading...
