Avaya S8700 - Page 6

Contents
6 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Installing and wiring telephones 27
Completing the installation 27
Testing the complete installation 28
• Mounting hardware in the rack 29
• Connecting the USB modems 29
Connecting to collocated servers 29
Connecting to separated servers 29
• Configuring and connecting the hardware in the rack 30
• Downloading license and Avaya authentication files 31
RFA information requirements for new installations 32
Going to the RFA Web site 32
• Configuring the media server 34
Copying files to the laptop 34
Powering up the media server 35
Accessing the media server 35
Clearing the ARP cache on the laptop 35
Setting up Telnet 35
Installing the software 36
Using the Installation Wizard 38
Verifying media server connection to the customer’s LAN (if provided) 39
Testing the media server LEDs 40
Disconnecting from the media server 41
Remastering the hard drive 41
• Configuring the modem 42
• Connecting duplication cables 46
Collocated media servers 46
Separated media servers 46
• Configuring a second media server 46
• Connecting UPS Ethernet cables to an Ethernet switch 46
• Configuring the SNMP modules in the uninterruptible power supplies 47
Duplex reliability configurations 49
High or critical reliability configurations 49
Setting selected traps (alarming) 50
• Configuring the SNMP subagent in the Avaya Ethernet switch (if used) 51
• Customizing the media server 53
Starting terminal emulation 53
Inputing translations 53