107
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
Ground for Media Gateway
Connect the DC Power
Use the procedures in the following task list to connect DC power.
• ‘‘Making DC Power Connections’’ on page 107
• ‘‘Connect AC Power to DC Power Cabinet’’ on page 111
• ‘‘Connect Battery Cabinet’’ on page 112
• ‘‘Connect Optional Battery Leads’’ on page 112
Making DC Power Connections
A 30 foot (9 m) cable connects to each cabinet. A special connector on one end of the cable is
plugged into the cabinet power connector. The cable must be cut to length and terminated inside
the J58890R DC power cabinet.
Figure notes
1 6 AWG (#40) (4 mm2) Wire
2 Expansion Control Media Gateway A
3 Single-Point Ground Block
4 To Additional Expansion Control
Media Gateways in Same Room
5 DC Power Cabinet
6 Ground Discharge Bar
4
5
1
1
6
dc
rect4 RBP 032896
Off
Off
On On
Off
Off
On On
2
3
To Next Page
Loading...
