Avaya S8700 - Test Expansion Interface Circuit Packs (S8700 Multi-Connect Only)

294
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Testing the Complete Configuration
May 2003
Sample Test Results screen for test license
Test Expansion Interface circuit packs
(S8700 Multi-Connect only)
Check each Expansion Interface (EI) circuit pack in the media gateway.
1 Type test board UUCSS where UUCSS is the cabinet, carrier, and slot for an Expansion
Interface (EI) circuit pack in the media gateway, and press
Enter.
NOTE:
Labels on the port network and carrier and on the strip under the circuit pack contain this
information.
2 Verify the screen displays test results similar to "Sample Test Results for Expansion
Interface Board 2A01—S8700 Multi-Connect". This example is for board 2a01.
3 If any result is FAIL, check the connections for the fiber optic link.
4 Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
Sample Test Results for Expansion Interface Board 2A01—S8700 Multi-Connect
test license
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
LIC-ERR 1484 PASS
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A01 EXP-INTF 237 PASS
02A01 EXP-INTF 238 PASS
02A01 EXP-INTF 240 PASS
02A01 EXP-INTF 241 PASS
02A01 EXP-INTF 244 PASS
02A01 EXP-INTF 316 PASS