Avaya S8700 - Install Auxiliary Cabinet Equipment

187
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Install Auxiliary Cabinet (Optional)
May 2003
Install Auxiliary Cabinet Equipment
The auxiliary cabinet allows for carrier, 23-in. (58.4 cm) rack, or panel mounting of the
hardware. The following equipment is furnished with the media gateway:
• Fuse panel — Distributes -48 VDC power to fused cabinet circuits
• Power receptacle strip — Provides switched and unswitched 120 VAC receptacles
• DC connector block — Required when the auxiliary cabinet is powered by an external
DC source
• AC to DC power supply — Converts AC power provided by the AC power strip
switched outlet to the required DC voltage.
The location of equipment inside the auxiliary cabinet is specified in the Customer Service
Document (CSD). The following optional equipment can be installed:
• 909A/B Universal Coupler
• Fan Assembly — Requires 120 VAC power
• External Channel Service Unit (CSU) — 1 is required for each T1 carrier link
• PagePac Paging System — 3 models are available. All PagePac models require 120 VAC
power.
• External system announcement units — may be powered by either -48V DC or 120 VAC.