48
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connect UPS Ethernet Cables to Ethernet Switch
May 2003
Connect UPS Ethernet Cables to
Ethernet Switch
Connect the CAT5 straight-through cables from the UPSs’ SNMP modules to the next available
port on the Ethernet switch. Make sure you are plugged into the correct port on the SNMP
module. Check the documentation that comes with the SNMP module.
For a connectivity guide refer to Getting Started with the Avaya™ S8700 Media Server with
MCC1 or SCC1 Media Gateway.
To Next Page
Loading...
