275
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Completing the Installation Administration
May 2003
3 Verify that the correct rule (number) is displayed in the Daylight Savings Rule
field.
4 If correct, press Cancel.
5 If not, go to the Maintenance Web Interface.
6 Under Server click Set Server Time/Timezone.
7 Verify that the date and time are correct. If not, set it here.
8 Repeat steps 1 through 3.
View alarms
The following administration is done on a computer used to access the active media server
using the Maintenance Web Interface.
1 Click View Current Alarms to clear any alarms
2 Resolve all alarms not involving the busied out standby server. Refer to the appropriate
S8700 maintenance documentation for information on how to resolve alarms.
To Next Page
Loading...
