Avaya S8700 - Label Expansion Control Carrier Cable (MCC1 Only)

172
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
Example 4-Pair Labeling to Information Outlet
Label Expansion Control Carrier Cable (MCC1
only)
1 Place the appropriate AUX connector label on the assigned 110-type terminal block row.
2 On the expansion control carrier cable, place a yellow auxiliary label on the connectors
at each end of the cable.
3 Write “AUX” on each label.
Figure notes
1 Equipment Room
2 To Central Location for Terminals 1
through 6
3 Blue Row on 110 Terminal Block
4 Purple Row on 110 Terminal Block
5 To Port Connector on Media Gateway
(Media Gateway 1, Carrier/Position
B, Slot 03)
6 258A Adapter
7 D-Inside Wire Cut Down to
Connecting Block
8 Information Outlet
9 Telephone
crdf4pr CJL 102996