40
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connect Duplication Cables
May 2003
Connect Duplication Cables
How you connect the duplication cables depends on whether the media servers are installed in
the same room or in separate locations. The S8700 Media Servers can be located up to 6 miles
(10 kilometers) apart.
Collocated media servers
Connect the crossover CAT5 cable and fiber optic cable between the 2 media servers. For a
connectivity guide, refer to Getting Started with the Avaya™ S8700 Media Server with an
Avaya™ MCC1 or SCC1 Media Gateway.
Separated media servers
When S8700 media servers are located greater than 100 meters but less than 10 kilometers apart
they are considered to be separated. The connectivity for this arrangement will be custom
engineered. For an overview of separated servers and Center Stage Switch, please see the job
aid entitled Server and CSS Separation—Avaya™ S8700 Media Server
.
To Next Page
Loading...
