Avaya S8700 - Set Locations (if Necessary)

273
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Completing the Installation Administration
May 2003
NOTE:
The default daylight savings rule is 0, meaning no daylight savings transition.
1 Type change daylight-savings-rules and press Enter.
2 Type the appropriate Start and Stop information in the Change Day, Month, Date,
Time, and Increment fields for each rule. For example, 1:00 in the Increment
field means to move the clock forward or back by one hour at the transition point.
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a daylight savings rule if
it is in use on either the Locations or Date and Time screens.
3 When done, press Enter to effect the changes.
Set locations (if necessary)
The following administration is done on a computer used to access the active media server
using a terminal emulation application.
change daylight-savings-rules Page 1 of 2
DAYLIGHT SAVINGS RULES
Rule Change Day Month Date Time Increment
0: No Daylight Savings
1: Start: first Sunday on or after April 1 at 02:00 01:00
Stop: first Sunday on or after October 25 at 02:00
2: Start: first on or after at : :
Stop: first on or after at :
3: Start: first on or after at : :
Stop: first on or after at :
4: Start: first on or after at : :
Stop: first on or after at :
5: Start: first on or after at : :
Stop: first on or after at :
6: Start: first on or after at : :
Stop: first on or after at :
7: Start: first on or after at : :
Stop: first on or after at :