EasyManua.ls Logo

Avaya S8700 - Trunk Cables Among Network Interface, Sneak Fuse Panel, and Media Gateway

Avaya S8700
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
146
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connect the Media Gateway to the MDF
May 2003
Trunk Cables Among Network Interface,
Sneak Fuse Panel, and Media Gateway
The 1-pair of Central Office (CO) trunks are installed by the network provider in the green field.
Up to 24 pairs may be terminated on each row of the 110-type terminal block. Tie trunks also
appear in the green field with up to eight 3-pair trunks terminated on each row of the 110-type
terminal block.
WP-90929, List 1 and 3 concentrator cables can be used to connect the media gateway to the
110-type terminal blocks in the purple field. The 1-pair patch cords/jumper wires are then run
from the purple terminal block rows to the green terminal block rows in order to establish the
correct 3-pair modularity.
Equipment Room Cabling Labels
Figure notes
1 Purple Label (Port Cable)
2 Blue/Yellow Label (Building
and Floor)
3 Yellow Label (Auxiliary)
4 Blue/Yellow Label (Site or
Satellite)
Equipment Room Labels
Label Name Range
Port Cable 1A1-1A20, 1B1-1B20, 1C1-1C20,
1D1-1D20, 1E1-1E20
Building Field Identified
Floor Field Identified
Auxiliary Cable Field Identified
Site or Satellite A-F and/or Field Identified
labels LJK 060396
1A2
A

Table of Contents

Other manuals for Avaya S8700

Related product manuals