Avaya S8700 - Check and Inspect the Order; Check Customers Order; Unpack and Inspect the Media Gateways-MCC1; Unpack and Inspect the Media Gateways-SCC1

62
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
Check and Inspect the Order
Perform these tasks before you begin the installation:
• ‘‘Check Customer’s Order’’ on page 62
• ‘‘Unpack and Inspect the Media Gateways—SCC1’’ on page 62
• ‘‘Unpack and Inspect the Media Gateways—G600’’ on page 63
• ‘‘Check Circuit Packs’’ on page 64
• ‘‘Correct Shipping Errors’’ on page 66
Check Customer’s Order
1 Check the customer’s order and the shipping packing lists to confirm that all equipment
is included.
2 Check the system adjuncts for damage and report all damage according to local shipping
instructions.
3 If any equipment is missing, report the information to your Avaya representative.
Unpack and Inspect the Media Gateways—MCC1
!
DANGER:
Use lifting precautions. A fully loaded MCC1 Media Gateway weighs as much as 800
pounds (363 kilograms) and may be top heavy. Use caution to avoid injury.
1 Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the
container. If the container has been shaken or tilted beyond specifications, the indicators
are red, indicating potential damage. Report any damage according to local shipping
instructions.
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2 Unpack the media gateway and remove all packing material.
3 Move the media gateway into its proper position.
4 Do not adjust the leveling feet at this time.
Unpack and Inspect the Media Gateways—SCC1
!
DANGER:
Use lifting precautions. An empty SCC1 Media Gateway weighs as much as 130
pounds (60 kilograms) and requires two people. Use caution to avoid injury.