16
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
• Option Switch Settings—job aid providing settings for various components.
• Server and CSS Separation—Avaya™ S8700 Media Server—job aid providing
information on and connectivity diagrams when the S8700 media servers are in
separate locations.
• Upgrading the Avaya™ S8700 Media Server—part of the HTML library providing
information on upgrading the Avaya
TM
Communication Manager and firmware for
various components and circuit packs.
• Administration for Network Connectivity for the Avaya™ Communication
Manager—documentation providing information on network connectivity.
• Maintenance for the Avaya™ S8700 Media Server with an Avaya™ MCC1 or SCC1
Media Gateway, Volumes 1–3 (555-233-142)—documentation providing definitions of
error codes and tests.
• Software patching procedures—procedures for installing software patches; available
from the Avaya Support Centre Web site (http://avaya.com/support/
) under Software &
Firmware Downloads.
The following process is included in this installation procedure:
• ‘‘Pre-installation Setup’’ on page 17
• ‘‘High Level Overview of Installation Process’’ on page 18
• ‘‘Mount the Hardware in the Rack’’ on page 22
• ‘‘Configure the Hardware in the Rack’’ on page 23
• ‘‘Customize the Active Media Server’’ on page 55
• ‘‘Install the Media Gateways’’ on page 60
• ‘‘Cabling the MCC1 Media Gateways—CSS’’ on page 94
• ‘‘Install Main Distribution Frame’’ on page 127
• ‘‘Connect the Media Gateway to the MDF’’ on page 144
• ‘‘Connecting to the Customer’s Network’’ on page 209
• ‘‘Installing and Wiring Telephones’’ on page 214
• ‘‘Connecting to the IPSIs’’ on page 188
• ‘‘Completing the Installation Administration’’ on page 272
• ‘‘Accessing the Avaya S8700 Media Server’’ on page 282
• ‘‘Testing the Complete Configuration’’ on page 290
• ‘‘Troubleshooting an Installation’’ on page 315
To Next Page
Loading...
