AVL F-FEM-DDC - 4.8.8 JTAG X22

55
Operation
F-FEM-DDC — User’s Guide
4.8.8 JTAG X22
Pin assignment for X22:
Fig. 32
Pin Signal Description
1DGND Ground
2 FLASH Ry/By
3FLASH WEn
4 VDD out 3.3 V max. 50 mA
5DGND
6 nc Not connected
7DGND
8 WDDIS Watchdog disabled
9 EMUn Emulation
10 nc Not connected
11 TMS Test Mode Select
12 TCK Test Clock
13 TRSTn Test Reset
14 TDI Data in
15 TDO Data out
case Shield Shield
Tab. 23
Information
This plug is only for production testing. In normal operation no cable must be
connected.
J1
15
1