AVL F-FEM-DDC - 5.2 D-SUB Connector with screw terminals

Options
58
F-FEM-DDC — User’s Guide
5.2 D-SUB Connector with screw terminals
If you prefer screw terminals than solder cups you can use this kind of connector
to contact 4 digital inputs or digital outputs.
Components of screw terminal connector:
The 12 screw terminals are marked with the pin number of the corresponding
D-SUB pin. The not connected pins on the D-SUB are not implemented as a
screw terminal to save space for the cabling.
Marking of the screw terminals.
Corresponding D-SUB Pin numbers:
Fig. 34
Fig. 35