Avocent MERGEPOINT SP MANAGER User Manual

To manage system event logs on a managed server:
1. Enter the show command followed by the /admin1/system[n]/log1 target to show the
records and properties of system event logs for system1.
/admin1-> show /system3/log1
/admin1/system3/log1
properties
MaxNumberOfRecords = 512
ElementName = IPMI SEL
OperationalStatus =
HealthState = 0 (Unknown)
EnabledState = 2 (Enabled)
RequestedState = 5 (No Change)
InstanceID = 172.26.25.122
verbs
cd
show
subtargets
record1
record2
record3
record4
record5
2. Enter the show command followed by the /admin1/system[n]/log1/record[n] target to show
the records information of system event logs for system1.
/admin1-> show /system3/log1/record1
/admin1/system3/log1/record1
properties
RecordData = *Power Unit*19650720061816.881664+000*Sys pwr monitor*Power
ycle*
InstanceID = 172.26.25.122:1
LogName = IPMI SEL
RecordID = 1
CreationTimeStamp = NULL
LogInstanceID = 172.26.25.122
ElementName = IPMI SEL Record
RecordFormat = *string Type*datetime DateTime*string Source*string
Description*
verbs
168 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English