To Next Page

To Previous Page

To get a specific AvctRT_PowerManagementService instance:

Enter the following command:

wsman get http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctRT_

PowerManagementService?SystemCreationClassName="AvctMP_

ComputerSystem",SystemName="<instance name>",CreationClassName="AvctRT_

PowerManagementService",Name="Power Management Service" -h <appliance_

IPaddress> -u <username> -p <password> -y basic

To turn on a service processor:

Enter the following command:

wsman invoke http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctRT_

PowerManagementService?SystemCreationClassName="AvctRT_

ComputerSystem",SystemName="<instance name>",CreationClassName="AvctRT_

PowerManagementService",Name="Power Management Service" -h <appliance_

IPaddress> -u <username> -p <password> -y basic -a

RequestPowerStateChange -k PowerState=2 -k ManagedElement="172.26.25.64"

NOTE: Use AvctRT_AssociatedPowerManagementService association with the instance of AvctRT_

PowerManagementService to determine the instance of AvctRT_ComputerSystem - the desired managed server.

To enumerate AvctRT_PowerManagementCapabilities instances:

Enter the following command:

wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctRT_

PowerManagementCapabilities -h <appliance_IPaddress> -u <username> -p

<password> -y basic

To get a specific AvctRT_PowerManagementCapabilities instance:

Enter the following command:

wsman get http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctRT_

PowerManagementCapabilities?InstanceID="<instance name>"-h <appliance_

IPaddress> -u <username> -p <password> -y basic

To enumerate AvctRT_AssociatedPowerManagementService associations:

Enter the following command:

wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctRT_

AssociatedPowerManagementService -h <appliance_IPaddress> -u <username>

-p <password> -y basic

178 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER User Manual

Questions and Answers: