or later, Mozilla 32-bit version 1.7.3 or later, or Mozilla 64-bit.
To access the MergePoint SP manager web interface:
1. Open a web browser and enter the IP address of the MergePoint SP manager.
2. Enter your username and password and click Login.
NOTE: When following any of the MergePoint SP manager configuration procedures in this document, start by
clicking the name of the MergePoint SP manager in the side navigation bar. Click Apply to save changes. To cancel
changes, click Back to return to the previous screen or click another navigation element, such as the name of a tab,
window or target.
Figure 3.1: MergePoint SP Manager Web Interface
50 MergePoint® SP Manager Installer/User Guide
To Next Page
Loading...
