Aztech 4-Port Wireless G Router User Manual

User Manual
Page 106 of 129
802.1x
802.1x is a security protocol for WLAN. It is a port-based network access control that
keeps the network port disconnected until authentication is completed. 802.1x is based
on extensible authentication protocol (EAP). EAP messages from the authenticator to the
authentication server typically use the remote authentication dial-in user service
(RADIUS) protocol.
Wireless Security
Wireless Security Wireless Security
Wireless Security –
––
– 802.1x
802.1x 802.1x
802.1x
To configure 802.1x:
1. Select the Wireless Menu
Wireless MenuWireless Menu
Wireless Menu.
2. Select Security
SecuritySecurity
Security. This opens the Wireless Security
Wireless SecurityWireless Security
Wireless Security page.
3. Select 802.1x
802.1x802.1x
802.1x.
4. Enter the IP address of your RADIUS server.
5. To temporarily implement changes, click Apply
ApplyApply
Apply.
6. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.

Aztech 4-Port Wireless G Router Specifications

General

Brand	Aztech
Model	4-Port Wireless G Router
Category	Network Router
Language	English