Aztech 4-Port Wireless G Router User Manual

User Manual
Page 87 of 129
Static
The Ingress - Static page enables you to configure a static CoS for all packets received on
a WAN or LAN interface.
Static
StaticStatic
Static
To configure Ingress Layer 3:
1. Select Adv
AdvAdv
Advanced Menu
anced Menuanced Menu
anced Menu.
2. Select QoS > Ingress
QoS > IngressQoS > Ingress
QoS > Ingress.
3. Select the quickstart
quickstart quickstart
quickstart interface.
4. Select Static
StaticStatic
Static.
5. At the ETHERNET Interface. You are configuring QoS on this interface only. Any
WAN/LAN interface that is not configured has the default Untrusted mode.
6. Select CoS1
CoS1 CoS1
CoS1 in Class o
Class oClass o
Class of Service
f Servicef Service
f Service. All incoming traffic from the ETHERNET interface
receives CoS1
CoS1CoS1
CoS1, the highest priority.
7. Click Apply
Apply Apply
Apply to temporarily activate the settings.
8. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.

Aztech 4-Port Wireless G Router Specifications

General

Brand	Aztech
Model	4-Port Wireless G Router
Category	Network Router
Language	English