User Manual
Page 41
of 129
PPPoE Connection
PPP, or point-to-point protocol, is a method of establishing a network connection/session
between network hosts. PPPoE is a protocol for encapsulating PPP frames in Ethernet
frames and is described in RFC 2516. PPPoE provides the ability to connect to a network
of hosts over a simple bridging access device to a remote access concentrator. With this
model, each router uses its own PPP stack. Access control, billing, and type of service
control can all be done on a per-user rather than per-site basis.
New PPPoE Connection Setup
New PPPoE Connection SetupNew PPPoE Connection Setup
New PPPoE Connection Setup
To Next Page
Loading...
