User Manual
Page 121
of 129
Error
Error Error
Error Error conditions that generally have less serious consequences than
errors in the emergency, alert, and critical levels.
..
.
Warning
Warning Warning
Warning Conditions that warrant monitoring.
Notice
Notice Notice
Notice (Default)
Conditions that are not errors but might warrant special
handling.
Info
Info Info
Info Events or non-error conditions of interest.
Debug
Debug Debug
Debug Software debugging message. Specify this level only when directed by
a technical support representative.
3. Enter the IP Address
IP Address IP Address
IP Address where the log will be sent to and then click Add
AddAdd
Add.
4. Click Apply
ApplyApply
Apply. The IP address will appear in the Select a logging destination
Select a logging destination Select a logging destination
Select a logging destination drop-
down menu.
5. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.
Note:
Note:Note:
Note:
When you select a log level, all log information within this severity level and levels above
(meaning, more severe levels) will be sent to the remote host.
To disable a remote log:
1. Select the IP address to be deleted from the Select a logging destination
Select a logging destination Select a logging destination
Select a logging destination drop-
down menu.
2. To temporarily implement the changes, click Apply
ApplyApply
Apply.
3. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.
To Next Page
Loading...
Need help?
General
