Aztech 4-Port Wireless G Router User Manual

User Manual
Page 57 of 129
Universal Plug and Play
Universal plug and play (UPnP), NAT, and firewall traversal allow traffic to pass through
the router for applications using the UPnP protocol. This feature requires one active WAN
connection. In addition, the computer should support this feature. In the presence of
multiple WAN connections, select a connection on which the incoming traffic is present,
for example, the default WAN connection.
UPnP
UPnPUPnP
UPnP
To configure UPnP:
1. Select Advanced
AdvancedAdvanced
Advanced.
2. Select Application > Enable UPnP
Application > Enable UPnPApplication > Enable UPnP
Application > Enable UPnP.
3. Select the WAN Connection
WAN Connection WAN Connection
WAN Connection and LAN Connection
LAN Connection LAN Connection
LAN Connection that will use UPnP from the drop-
down lists.
4. Click Apply
Apply Apply
Apply to temporarily apply the settings.
5. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.

Aztech 4-Port Wireless G Router Specifications

General

Brand	Aztech
Model	4-Port Wireless G Router
Category	Network Router
Language	English