Aztech 4-Port Wireless G Router

User Manual
Page 115 of 129
LAN Isolation
LAN isolation allows you to disable the flow of packets between two LAN groups. This
allows you to secure information in private portions of the LAN from other publicly
accessible LAN segments.
LAN Isolation
LAN IsolationLAN Isolation
LAN Isolation
To enable LAN Isolation:
1. Select the Security Menu
Security Menu Security Menu
Security Menu and then click LAN Isolation
LAN IsolationLAN Isolation
LAN Isolation.
2. On the LAN Isolation
LAN Isolation LAN Isolation
LAN Isolation page, select the checkbox for Disable traffic between LAN
Disable traffic between LAN Disable traffic between LAN
Disable traffic between LAN
group 1 and LAN group 2
group 1 and LAN group 2group 1 and LAN group 2
group 1 and LAN group 2.
3. To temporarily implement the changes, click Apply
ApplyApply
Apply.
4. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.