Aztech 4-Port Wireless G Router User Manual

User Manual
Page 83 of 129
Layer 2
Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is
only configurable on the WAN interfaces as VLAN is only supported on the WAN side in
the current software release.
Layer 2
Layer 2Layer 2
Layer 2
Field
FieldField
Field Description
DescriptionDescription
Description
Interface Select the WAN interface here to configure the CoS for incoming traffic. Only WAN
interface can be selected as VLAN is currently supported only on the WAN side.
Class of Service The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5,
and CoS6.
User Priority The selections are 0, 1, 2, 3, 4, 5, 6, 7.
To configure Ingress Layer 2:
1. Select Advanced Menu
Advanced MenuAdvanced Menu
Advanced Menu.
2. Select QoS > Ingress
QoS > IngressQoS > Ingress
QoS > Ingress.
3. Select the quickstart
quickstart quickstart
quickstart interface.
4. Select Layer 2
Layer 2Layer 2
Layer 2.

Aztech 4-Port Wireless G Router Specifications

General

Brand	Aztech
Model	4-Port Wireless G Router
Category	Network Router
Language	English