14. Communicator touch panel
14.1 Introduction
Communicator Touch Pan el for digital cinema projectors
The Comm unicator Touch Panel is designed for m ulti-user command and control, the Comm unicator enables user s to learn quickly
and operate efficiently - using an elegant and flexible touch panel interface. The interface’s commonality means that operators
can intuitively use any model in the product line, without restriction, and its us er-friendly nature translates d irectly into a short and
enjoyable learning curve.
Image 14-1
Flexible touch panel interface
The touch panel interface can be m ounted upon a swivel arm whic h easily fits on top of the DP 2K-12C/11CX projector. One central
locking mechanism of the swivel arm allows an instant fixation of the t ouch panel interface in any position.
The touch panel interface can also be installed further away from the DP2K-12C/11CX projector. For that you can use a serial
(RS232) cable up to 1 0 m eter or an Ethernet cable up to 50 meter to realize a dire ct data communication between the DP2K -
12C/11CX projector and the Communicator Touch Panel.
The touch panel interface can also be connected with a Local A rea Network (LAN) just like the D P2K -12C/11CX projector. In this
case both devices can communicate with each other as we
ll.
The touch panel interface require s a voltage s upply +12 VDC a nd 1,5 ampere. Note that the DP2K-12C/11CX projector has a 12
VDC output which c an be used to power up the touch panel interface. Nevertheless, the use o f a separate +12 VDC adaptor (1,5
ampere minim um) is required in case the touch panel interface is installed more then a few meters away from the DP2K-12C/11CX
projector.
A crossed DC cable has to be used when connecting the +12 VDC output from the Input & Communication
unit o f the DP2K- 12C/11CX projector directly w ith the Touch Panel interface.
Parts location of the touch panel interface
E
B
C D
A
F G H
Image 14-2
A Touch screen.
B Communication ports.
C Knobtooperatecentralswivelclamp.
DBaseofswivelarm.
E Power input (12 VDC – 1,5 A).
F RS323 port (9 pins SUB-D ).
G Ethernet port (RJ45).
H Two USB ports to connect USB stick, mouse or keyboard.
262 R5905043 DP2K-12C/11CX 19/02/2018
To Next Page
Loading...
