5. Removal and installation of projector covers
5.7 Open the sealed compartment
This pro cedure assum es that the left side cover of the p rojector is already removed.
Necessary tools
Allen wrench 3 mm
How to open the sealed compartment of the Light Processor Unit?
1. Release the three hexagon head cap screw s as illustrated. Use for that a 3 m m Allen wrench.
Note: A wash er is m ounted between the plate and the screw head.
Image 5-13
2. Lift up the c over plate slightly, using the two lower lips provided, and then remove the cover plate away f rom the projector.
Image 5-14
R5905043 DP2K-12C/11CX 19/02/2018 85
To Next Page
Loading...
