21. Maintenance procedures
Image 21-2
Dust filter removal
Clean the dust filter
1. Remove mo st contamination with a vacuum cleaner in an other room or o utside.
2. Blow remaining du st away with compressed air in an other room or outside.
Mount the dust filter
1. Insert the dust filter with the handle to the projector side.
2. Pull the handle a little backward, push the filter com plete ly in. Releas e the handle so that it jumps in its lock.
334 R5905043 DP2K-12C/11CX 19/02/2018
To Next Page
Loading...
Need help?
General