BD BACTEC™ FX Instrument User’s Manual
170
Maintenance Utilities Messages
UTIL01
Database saved! A save operation was
completed successfully
(Maintenance – Utilities –
Save DB).
Message is informational.
UTIL02
Database save
failed!
A save operation was not
completed successfully. Flash
drive could be full, or the file
system on the drive could be
corrupted.
Retry the save operation. If error
recurs, retry the operation with a new
flash drive.
UTIL03
Event log saved! A save operation was
completed successfully
(Maintenance – Utilities –
Save Log).
Message is informational.
UTIL04
Event log save
failed!
A save operation was not
completed successfully. Flash
drive could be full, or the file
system on the drive could be
corrupted.
Retry the save operation. If error
recurs, retry the operation with a new
flash drive.
UTIL07
Verify there is a
valid BACTEC
FX
Software Upgrade
disk in the
instrument. Press
Yes to continue with
the Upgrade.
You have entered a valid
password to upgrade the
instrument software.
Insert the software update flash drive
into the USB port and select Yes to
continue.
UTIL10
Did not find a valid
BACTEC
FX
Software Upgrade
disk.
The flash drive in the USB
port does not contain updated
BD
BACTEC FX instrument
software.
Locate the correct flash drive for the
instrument software update and insert
it in the USB port.
If the flash drive is labeled correctly
(indicates correct software update
version), contact BD for a new
software update flash drive.
UTIL11
Password incorrect,
please reenter.
The current password was
entered incorrectly.
Enter the correct current password.
UTIL12
Confirmation of
new password
failed. Try again.
A different password was
entered in the New password
and Confirm password fields.
Enter the same password in both New
password and Confirm password
fields.
UTIL13
Password
successfully
changed.
The new password entered
was accepted.
Message is informational.
Error
No.
Message Possible Cause(s) Corrective Action(s)
To Next Page
Loading...
