BeaconMedaes TotalAlert Infinity - Central Alarm; Combination Alarm; Boards

1-2
TotalAlert Innity™ HTM Medical Gas Notication System
4107 9016 60.01
Figure 1.4: B05 Power Board
B05 Power Supply Board
Features:
• Supplies 24VDC to all circuit boards in the alarm.
1.2.2 Central Alarm
Features:
Displays a maximum of 24 signals. Combinations can
include:
• Locally wired BeaconMedaes Line Contact
Monitored Signals (Up to 20)
• Medipoint/Shire Network signals
• Ethernet Wired signals (From up to 8 panels)
1.2.3 Area Alarm
Features:
Monitors up to 8 Digital gas sensors.
• Digital pressure/vacuum read out with Low/
Normal/High indicators
• Customizable gas ID labels with user-dened
location labels for each monitored gas
• 1/4” BSPP connection on gas sensors
• Gas Specic Digital ID for each gas sensor
1.2.4 Combination Alarm
Monitors a mix of BeaconMedaes plant signals, digital
gas sensor modules, and 4-20mA transducers.
Features:
• User-dened values for monitoring any two or
three-wire 4-20mA transducer
1.2.5 Boards
Figure 1.3: B03 Advanced Board
B03 Advance Board
Features:
Contains hardware for advanced features of the
TotalAlert Innity™ Alarm.
NOTE:
I = 4-20mA Inputs
X = Source Signal Inputs
Y = Dry-Contact Relay Outputs
D = Digital Gas Sensor Inputs