540
CONTROL STATION
Studio ti 03312 540-04usa
102
6
Advanced control modes
SmarCommand provides different advanced control modes:
−
EASIDOCK: mode giving the answer for a safe action of the gear box
and ensuring a easy and accurate manoeuvrability during mooring
phases with limited room.
−
AUTOTROLL: mode keeping the propeller revs per minute constant
when a complete range of shaft speed controls is available.
−
WARM UP: heating mode increasing the engine rpm when the
transmission is stalling on idle.
−
ONE LEVER: one head mode allowing to activate several propellers
with gear change and acceleration complete control by means of a
single head.
High and low buttons allow you to control the shaft rotation (engine
RPM) through the use of SmartCommand Trolling System.
In the Cruise Mode, the up and down push buttons allow to move to at
least five percent of Trottle Command. By pressing the buttons (high or
low), the command can be incremented or decremented up to twenty (20)
percent.
The Autotroll Mode allows for slipping the clutches to go between 30 and
70 percent of idle speed. It allows fine-tune movement of the yacht by
pressing the panel HIGH or LOW buttons.
To Next Page
Loading...