540
12
SAFETY DEVICES AND EQUIPMENT
Studio ti 03312 540-04usa
283
1. Green light
Indicates that the extinguisher is full.
2. Red light
Indicates that the extinguisher is empty.
3. Acoustic signal
Indicates that the system is operating and that the extinguisher is
releasing gas.
4. OVERRIDE/NORMAL switch
• When the switch is placed to NORMAL position, the power unit
actuates and stops the engines, generator and ventilators, in case
of extinguisher discharge.
• When the switch is placed to OVERRIDE position, the control unit is
cut-out.
NOTICES
The switch must always be set to NORMAL position. The OVERRIDE
control has to be used only with navigation in confined waters or with a
collision hazard and to restart the engines after the system discharge.
S
CAUTION
The OVERRIDE switch must be used only in case of real emergency.
To Next Page
Loading...