EasyManuals Logo

Beta Ark AC User Manual

Beta Ark AC
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
1 - 10
Cause Remedy
DEFECTIVE TRANSMISSION
- Worn belt
- Clutch slipping
- Mobile pulleys defective sliding
- Jerk or irregular working
- Variator needles are worn or poorly oiled
- Replace.
- Check the centrifugal shoes unit, replace if necessary.
- Check the components, replace worn parts, if any, and
oil only with grease.
- Check that counterweights can be moved with one fin-
ger’s pressure or that they retract regularly.
- Check that there is no grease on the counterweights.
- Check correct operation of the gaskets.
- Check that the clutch housing pan is not scored.
- Never run the engine without the clutch housing pan.
- Check the components, replace if necessary.
Cause Remedy
DEFECTIVE RETURN OF STARTING LEVER
- The involved parts have not been oiled
- Excessive wear of couplings
- Oil the spring and the sector gear axis with grease.
- Check the starting shaft’s capacity.
Cause Remedy
LIGHTING SET TROUBLES
- The oil check is not working.
- The flashlights are not working.
- Check the lighting set.
- Check the voltage regulator.
Cause Remedy
DEFECTIVE STEERING
- Excessive slack on steering.
- Housing of upper or lower bearings with slack on frame.
- Blocked steering.
- Damaged steering housings.
- Upper gasket of steering has loosened, retighten.
- Check and/or replace bearings housings on frame.
- Reset correct driving torque on gasket.
- Replace steering's housings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta Ark AC and is the answer not in the manual?

Beta Ark AC Specifications

General IconGeneral
BrandBeta
ModelArk AC
CategoryMotorcycle
LanguageEnglish

Related product manuals