Binder CB 160 - Page 80

CB (E6.1) 07/2017 Page 80/145
Then you can enter the delay time for the CO
2
tolerance range alarm:
Enter alarm delay [min]
08.03.2013 05:05:06
Entry menu “CO2 alarm delay”
Enter the desired delay time in minutes with the
operating button.
Setting range: 0 up to infinite
Press the “Ok” button to confirm.
..\ CO2 alarm delay
1
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
O
2
(chamber with O
2
control)
First you can enter the desired value of the CO
2
tolerance range:
Enter tolerance range
08.03.2013 05:05:06
Entry menu “O2”.
Enter the desired value for the O
2
tolerance range
with the operating button.
Setting range: 0 vol.-% up to 100 vol.-%
Press the “Ok” button to confirm.
..\ Tolerance ranges \ O2
1
.0 [Vol.-%]
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
Then you can enter the delay time for the O
2
tolerance range alarm:
Enter alarm delay [min]
08.03.2013 05:05:06
Entry menu “O2 alarm delay”
Enter the desired delay time in minutes with the
operating button.
Setting range: 0 up to infinite °C
Press the “Ok” button to confirm.
..\ O2 alarm delay
1
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home