Balance System SD (with v4.X software) 113
11. System Specifications
Dimensions:
Base: 30" w x 44" depth x 8" h (76 x 112 x 20 cm) Platform: 21.5" dia (55 cm).
Display Height: Adjustable from 53" to 68" h above platform (135 x 173 cm); 76" h (193
cm) maximum from floor.
Support Rails: Adjustable from 25" to 36.5" above platform (64 to 93 cm).
Rails can swing away from platform when not in use.
Platform Tilt: 20 degrees from horizontal in all directions.
Stability Levels: Twelve levels, plus locked for static measurements.
Display Specifications:
Display Size and Type: 15.6 inch AIO resistive touch screen computer.
Intel Celeron Proc, 32 G SSD.
Display resolution: 1366 x 768.
Operating System: Window 7 Embedded.
Printing: PCL printing via USB port recommended. Also supports PDF.
Memory: 2 G RAM.
Audio: Audio out with standard stereo line jack.
User Interface and Device Capabilities:
USB ports: Four 2.0 and two 3.0 host ports to support Mass Storage Device: USB flash
drive, Keyboard/ Mouse/ Printer.
Plus:
(1) Remote CRT connector.
(1) Serial communication port.
Operating Temperature Range: 59° F to 86° F (15° C to 30° C).
Operating Humidity Range: 30% to 75%.
Transport/Storage Temperature Range: -4° F to 140° F (-20° C to 60° C) Transport/Storage.
Humidity Range: 20% to 80% non-condensing Printer: HP DeskJet.
Printer Stand: 24" x 24" (61 x 61 cm).
Patient Capacity: Up to 400 lb (136 kg).
Weight: 196 lb (89 kg).
Power: 115 VAC, 50/60 Hz, 15 amp line or 230 VAC, 50/60 Hz, 15 amp line.
Power Rating: 350 watts.
Certification: ETL listed to UL 60601-1 and CAN/CSA C22.2 No.:601-1-M90. CE conformity to
EN 60601-1, EMC compliance to EN 60601-1-2.
Warranty: Two-years parts; one-year labor.
To Next Page
Loading...
