86 Biodex Medical Systems, Inc. © 2017
To Select a Custom Protocol From the Training or Testing Menus:
1. To select a previously created custom protocol touch <Custom Protocol> from either the
Training or Testing menu screens.
2. A listing of either training or testing protocols is displayed. Select the desired custom
protocol from the list and proceed with the training or testing.
To Delete a Protocol:
1. At the main screen, touch <Utilities>.
2. At the System Utilities screen, touch <Configuration>.
3. Select <Balance System SD Configuration> from the Configuration screen submenu.
4. Select <Custom Protocol List> from the Balance System SD Configuration submenu.
5. The Custom Protocol list is displayed.
6. Select the Custom Protocol row to delete.
7. Select <Delete>.
8. A confirmation screen is displayed, confirming that the protocol is to be deleted. Touch
<OK> confirm or <Cancel> to return to the Custom Protocol List screen.
NOTE: The <Edit> button is only applicable to Custom Sensory Tests.
Create, Save, and Recall Custom Sensory Tests
With the option to create a custom protocol specifically for sensory testing, clinicians have an
added versatility if they feel the m-CTSIB and BESS tests cannot be adequately customized to
their needs. A Custom Sensory Test differs slightly from other Custom Protocols in that it is not
accessed from the <Custom Protocols> button on the main Testing screen. Instead, Custom
Sensory Tests are displayed as their own button on the Sensory Testing submenu, alongside the
<m-CTSIB> and <BESS> Test buttons.
To Create a Custom Sensory Integration Test:
1. At the main screen, touch <Utilities>.
2. At the System Utilities screen, touch <Configuration>.
3. Select <Balance System SD Configuration> from the Configuration screen submenu.
4. Select <Custom Protocol List> from the Balance System SD Configuration submenu.
5. The Custom Protocol list is displayed.
6. Select <Add Protocol>.
7. Touch the <Testing> button on the resulting Protocol Setup screen.
8. Touch the <Sensory Integration> button.
9. Touch the <Custom Sensory Integration> button.
10. Touch the Protocol Name field and use the keypad to name the protocol.
11. Touch the Condition Name fields and use the keypad to add conditions.
To Next Page
Loading...
