1) Remove the lid and rim protection
2) Remove the top cover
3) CAUTION!
Insert the forklift under the package from the
back side and lift until the floor is up – take
care to not put the forklift on the screws.
4) Unscrew the six screws (A)
5) Remove and place the access ramp in
front of the cabinet
6) Unscrew the two screws (B) that hold the
flange in front of the cabinet. This flange
is used to reinforce the access ramp.
7) Place the wood flange under the access
ramp and use the two (B) screws to lock
in place the access ramp
8) Bring down slowly the cabinet with the
forklift until the wheels of the cabinet
reach the lower part of the package.
CAUTION:
Two men are required, the first to retain the
cabinet, the second to push the cabinet
Do not forget to place the shim (in red) un-
der the ramp
9) Push slowly the cabinet to go down
To Next Page
Loading...