BCS-8xx series installation manual
CAUTION:
Two men are required, the first to retain the
cabinet, the second to push the cabinet
Do not forget to place the shim (in red) un-
der the ramp
10) Push slowly the cabinet to go down
Fig. 24: Unpacking of BCSC-38U using Forklift.
2.3 BCSC cabinets installation
Caution!
Only Qualified personal are authorized to do the Electrical Installation -
Contact your technical service or your local Electrician to prepare the
electrical connections -
Be sure that the electrical power in is disconnected and cannot be
accidentally re-armed (secure the access).
Be sure that the Earth grounding system is compatible with our
recommendation (please see 2.1.1 Preparing the physical instal-
lation section).
Be sure that the voltages between Phases and Neutral are 200-
240 VAC
To Next Page
Loading...