BioLogic BCS-810 - Technical Specifications; Electrical Specifications

BCS-8xx series installation manual
52
8) The up-
grade/downg
rade process
starts and
“Upgrad-
ing...” ap-
pears on the
bottom of the
window (but
the firmware
is really
downgrad-
ed).
Fig. 66: Flash loading.
Fig. 67: Upgrading message on the status bar.
9) Close the “firmware downgrading/upgrading” window and the v1.10. The upgrading
procedure is now completed and you can connect the older version to the instrument.
10) Open the new version v1.30 and connect to the instrument.