Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Machine and operating elements
38065447002 en-US 33 / 101
Product length
Specifies the product length in mm. This is required in order to
calculate the reference weight and to determine the end posi-
tion of the product holder.
Product profile
Describes the profile of the product. This is required in order to
calculate the reference weight.
Calibrated product
Slightly uncalibrated product
Heavily uncalibrated product
Product weight
Specifies the product weight in kg. This is required in order to
calculate the reference weight.
Reference weight
The reference weight represents the volume weight of the prod-
uct to be sliced. This is specified in g/mm or lb/mm and is
needed for slicing by target weight.
Information on depositing area
Depositing area width
Specifies the width of a package in mm.
Depositing area length
Specifies the length of a package in mm.
Depositing area height
Specifies the height of a package in mm.
Information on slicing program
PLU No.
Unique number of slicing program.
PLU name
Name of slicing program.
Depositing type Stacking
Depositing type Shingling crosswise
To Next Page
Loading...
Need help?
General
